Model & Picture Specification

HHO Dry Cell 5 Plates For Bike

HHO Dry Cell 5 Plates For Bike

◇ Dimensions: 2*2*2" inch
◇ 5 Plates 316L StainLess Steel
◇ Production : 0.6 LPM
◇ High temperature Cast Acrylic end Plates
◇ Two 3/8" 90 Degree NPT Elbows with Hose Barbs
◇ 1.5mm Neoprene Rubber Rings
◇ Net Weight: 300gm
◇ Our Dry Cell is expandable
◇ Plate's thickness: 0.8mm (brushed)
◇ Working at 12v 1amp DC.
◇ Sections of high pressure pipe
Model & Picture Specification

 

HHO Dry Cell 9 Plates

◇ 9 Plates of 316L Stainless Steel Plates

◇ Dimensions: 4*4*2 cm

◇ High temperature Cast Acrylic end Plates

◇ Four 3/8" 90 Degree NPT Elbows with Hose Barbs

◇ Two NPT 3/8" True "Y" with Hose Barbs

◇ 2.5mm Neoprene Rubber Rings

◇ Net Weight: 3.5kg

◇ Our Dry Cell is expandable.

◇ Stainless Steel Plate size is 15.2*15.2 cm (6*6 inch).

◇ Plate's thickness: 1mm (brushed)

◇ Production: 1LPM to 5LPM.

◇ Working at 12v 1amp to 50amp.

◇ Fittings including: 2pcs of 1/4x3/8 Elbows, 2pcs of 3/8x3/8

Elbows, 2pcs of 3/8 True Y Connections, 8pcs of Hose Clamps, 4

sections of high pressure pipe
Model & Picture Specification

HHO Dry Cell 25 Plates

◇ 25 Plates of 316L Stainless Steel Plates

◇ Dimensions: 19*19*11 cm

◇ High temperature Cast Acrylic end Plates

◇ Four 3/8" 90 Degree NPT Elbows with Hose Barbs

◇ Two NPT 3/8" True "Y" with Hose Barbs

◇ 2.5mm Neoprene Rubber Rings

◇ Net Weight: 4.9kg

◇ Our Dry Cell is expandable.

◇ Stainless Steel Plate size is 15.2*15.2 cm (6*6 inch).

◇ Plate's thickness: 1mm (brushed)

◇ Production: 2LPM to 20LPM.

◇ Working at 12v to 35v, 10amp to 70amp.

◇ Fittings including: 2pcs of 1/4x3/8 Elbows, 2pcs of 3/8x3/8

Elbows, 2pcs of 3/8 True Y Connections, 8pcs of Hose Clamps, 4

sections of high pressure pipe
Model & Picture Specification

3.2 Ltr Water Reservoir Tank

◇ 3 NPT 1/4" x 3/8" Tube ID

◇ Tight fitting screw cap-non vented - Not the cheap snap-on lid type that leaks HHO gas and sucks atmosphere air

◇ 3.2 Quart Tank measures 6.33" x 7.75" x 4.25"

◇ Tank Comes with (2) 3/8" Barbed Elbows and (1) 3/8" Barbed

Direct Connection

◇ Tight-fitting, non-vented filler cap & heavy duty molded side
mounting ears

◇ Tank is guaranteed not to leak

◇ Allows the water to circulate in the generator through the tank, makes for a cooling running system and lower amp draw

◇ 1/4" return and inlet fittings are placed at bottom of tank for less moisture problems on the HHO gas outlet hose

◇ Thick-walled container, heat resistant, Heavy Duty thickness
Model & Picture Specification

1.2 Ltr Water Reservoir Tank

◇ Two Elbows 1/4" NPT x 3/8" Tube ID
◇ One Direct Connection 1/4" NPT x 3/8" Tube ID.
◇ Tight fitting screw cap-non vented - Not the cheap snap-on lid type that leaks HHO gas and sucks atmosphere air
◇ 1.5 Quart Tank measures 4.33" x 5.52" x 3.75"
◇ Tank Comes with (3) 3/8" Barbed fittings.
◇ Tight-fitting, non-vented filler cap & heavy duty molded side
mounting ears
◇ Tank is guaranteed not to leak
◇ Allows the water to circulate in the generator through the tank, makes for a cooling running system and lower amp draw
◇ 3/8" return and inlet fittings are placed at bottom of tank for less moisture problems on the HHO gas outlet hose
◇ Thick-walled container, heat resistant, Heavy Duty thickness
Model & Picture Specification

Water Circulation Pump

Input: 12V DC
Pressure: 2.9psi @12V
Vertical delivery: 2m (6.5ft) 
Fluid PH:5-10
Current: 500mA@12V
Intake: 13.8mm/9mm Dia.
Outlet: 7.2mm/5mm Dia. 
Life span: > 20,000hrs @ 1600rpm~4200rpm
Noise: << 30dB 
Working Temp: 70'C (non-submersed) 
Envir Temp: <40'C 
Size(L*W*D): 2.36"x1.3"x1.6" (59mm X 33mm X 41mm)
Weight (net): 5.0oz



Warning: 
Do not let it run dry without water. To those who want to use it with a solar power battery, please make sure to install a 12V regulator higher than 12V (as high as 21V) or the solar panel charger will cause damage to the pump. Warranty will not cover it.

Model & Picture Specification

PWM 70AMP

◇ CE & FCC approval!!

◇ Power supply: 12/24V DC adjustable

◇ Load voltage: 12/24V DC. /70 amp. Max.

◇Output Frequency PWM 70 can output frequency from 10Hz to 30kHz.

◇ Adjust output current from 0% to 100%

◇ Easy changing Cool Fan
◇ Easy wires connection port, Dual inputs Dual outputs
Model & Picture Specification

PWM 70A

◇ Max Output 70AMPs, 30KHz
◇ Auto Save. The Frequency and Duty Cycle can be auto saved. When the data achieves your need, stop tuning for 2 seconds. The data can be auto saved.
◇ Memory After the Duty Cycle and the Frequency was saved, the PWM70 will run at this recorded data next time when it is powered on.
◇ Working Voltage PWM70 can work at 12V.
◇ Output Frequency PWM70 can output frequency from 10Hz to 30kHz.
◇ Duty Cycle: 0%~99%
◇ Dual in Dual out wires, easy connection.
Model & Picture Specification

PWM 50A

◇Max Output 50AMPs, 1000 Hz

◇ Working Voltage PWM50 can work at 12V.

◇ Output Frequency PWM50 can output frequency from 10Hz to 30kHz.

◇ Duty Cycle: 0%~99%

◇ Dual in Dual out wires, easy connection.

◇ Prevent load from battery and alternetor.

Model & Picture Specification

Dynamic PWM 50A

◇Max Output 50AMPs, 30KHz

◇ Working Voltage PWM50 can work at 12V.

◇ Output Frequency PWM50 can output frequency from 10Hz to 30kHz.

◇ Duty Cycle: 0%~99%

◇ Dual in Dual out wires, easy connection.

◇ Prevent load from battery and alternetor.

Model & Picture Specification

HHO PWM 20A

◇Max Output 20AMPs, 1000Hz

◇ Working Voltage PWM 20 can work at 12V.

◇ Output Frequency PWM 20 can output frequency from 10Hz to 1000 Hz.

◇ Duty Cycle: 0%~99%

◇ Singal in Singal out wires, easy connection.

◇ Prevent load from battery and alternetor.

Model & Picture Specification

Electronic Fuel Injector Enhancer's (EFIE's)

◇ 1 ENGINE MOUNT ELECTRONICS

◇2 Electronic Fuel Injector Enhancer's (EFIE's)

◇ 1 Map Sensor Enhancer

◇ 1 O2 Sensor Enhancer (Upstream & Downstream)

◇ For 1996 And Older Fuel Injected Vehicles

◇ Adjustment Necessary

Model & Picture Specification

HHO INDIA VOLO CHIP

◇ 1 HHO INDIA VOLO CHIP

◇ Automatically Controls Air/Fuel Ratio For HHO

◇ Factory Preset No Adjustment Necessary

◇ 1 IAT Sensor Enhancer

◇ For 1996 And Newer Fuel Injected Vehicles

◇ Connects To Diagnostic Port (OBD II Port)

Model & Picture Specification

FUEL INJECTOR CONTROLLER DEVICE

◇ 1 Fuel Injector Controller Device

Model & Picture Specification

Sunt with ameter

◇ DC Amp Current Meter with Shunt (50A or 100A)
◇ Real LCD Display
◇ High quality Shunt 50A or 100A (Optional)
◇ Input Voltage: 6 - 15V. (12V Battery Recommended)
◇ Class 0.5 accuracy
◇ 75mV per Amp Voltage drop
◇ Easy installation
Model & Picture Specification

4 Pin Heavy Really

Rating:40A/12VDC
◇ Type: SPDT: Single Pole Double Throw
◇ Coil Resistance: 90 Ohms
◇ Coil Inductance 0.8H
◇ Dielectric Strength: 500V RMS
◇ Electrical Life: Quality tested to 100,000 cycles at40A, 10
Million operations
◇ Temperature Range -40°C ~ 125°C
◇ Inital Operating Data 7 milliseconds
Model & Picture Specification

Shut Off Valve

◇ 1 SHUT OFF VALVE

◇ 3/8 Inlet 3/8 Outlet

◇ High Quality Shuts All The Way Off

Model & Picture Specification

Flash back arrister

◇ 1 - 3/8 CHECK VALVE

◇ Only Allows Flow One Direction

Model & Picture Specification

Y-Connetor

◇ 3/8" True Y Hose Barbs
◇ High quality material, heat resistant
Model & Picture Specification

Fuse Holder

◇ The current rating is 30A, 32v, DC (6v, 12v, 24v) for the fuse holder

◇ Suitable for standard blade fuses the kit comes complete with 1 x 30amp blade fuse

◇ Waterproof your electrical connection using this fuseholder

  • Complete with 100mm of 12AWG red insulated wire each side of the fuse holder
  • 1 x 30 amp standard blade fuses
Coming Soon...

HHO Stove

The Stove EP-168 produces 680L/h of gas consuming 0.1L/h of water. Used in homes,coffee shops, restaurants, cafeterias, grills and barbucue and chain fast food companies for frying and hamburger cooking. Specifications Model DB-006 One Burner Max. Gas Production: 680 L/h Phase: Single Power Requirement: 110V AC Current: 2A Power Consumption: 0.5-1 kW/h Pressure: 0.3 kg/cm2 Water Consumption: 0.1 L/h Coolant Consumption: 0.3L/h Water Supply : Auto Water Reservoir: 10L Coolant Supply: Auto Coolant Reservoir: 10L Dimensions: 650 *550 *750mm (25 5/8*21 5/8*16* 29 ½ pol) Gross Weight: 60kg(132 lb) Space Requirement:Front: 500mm(20pol) Height: 800mm(32 pol) Sides & Back:

Roti Maker

The DEV Bhumi Enterprises lunches very unique product very first time in the world. This Products works automatically and very fast. Its very unique invention by dbe engineers in today’s world. It will be very helpfull for every person to give him food on time. this product is demand of every home and it will save your time which you spend your time in cooking.

Magnetic Cycle

Magnetic cycle works on the principal of electro magnetic field. Once a electro magnate starts revolving, the E.M.F. Products it produce energy by using a electro magnetic motor. When you push a paddle of cycle once it starts runing & it will run until you stop it. So this magnetic cycle will give you a different comfort zone of cycling. Just push it once & you can travel thousands of km.

footer
\